For Steel Plants, Zink - Color Coating line

Through our continues research and development efforts we are able to make Heavy-duty cleaning machine. With the use of our brushing technology, we have been able to remove / reduce the black carbon suits and Oil patch which is normally removed with the use of hazardous pickling process.

Our Field trial has proved that saving on pickling chemical cost reduction to the tune of 70% to 75% can easily be obtained by reducing concentration of chemical.

Help to remove most common problems
Skinpass Wiper bar foto

Wiper bar made with highly compressed nonwoven material for the best use of skin passes oil cleaning application. Valgro wiper bar available with fine grit of abrasives impregnated along with non-abrasives material. Good output against felt strip, cork, and carpet duster Use them singly or butted together on continuous coil lines. Excellent as tension bars on slitting lines. Reduce metal slippage, Eliminates dry spots, and Protects steel from gouging, scratching, damage when moved about mill

Product Hardness Length Width Thickness
Wiper Slabs Soft / Medium / Hard 200mm 200mm 12 mm / 25mm
Wiper Bars Soft / Medium / Hard 400mm 50mm / 100mm 12mm / 25mm
Sanding Block foto

Sanding blocks are based on "Valgro-Fynex" layers and compressed before be polymerized. These blocs are particularly recommended to clean cylinders of rolling mills.

Abrasive Grade Thickness
Aluminum oxide & SIC 120,220,320,400, 800 12mm / 25mm
Mill roll foto

Mill Roll Produced with synthetic non-woven fabric discs compacted together with a very flexible adhesive that provide the following product advantages: Unique construction offers savings and performance advantages over conventional rolls
Self healing: Longer operating duration without routine maintenance
Fluid Control: Removing or applying processing fluids
Friction: Resists slipping on the strip's surface which equates to control, reduced costs, and higher quality
Non-Marking: "Void Volume" absorbs oxides that mark, and friction capability combined with soft fibre and resin prevent scratches.

Nilox Abrasives Brush foto

Made from DuPont Tynex Nylon6 material with mixtures of high quality abrasives grain extruded throughout the filament. This provide the product with the following advantages:
Life: Longer operating duration due to the high density and multi-bristle quality. Cleaning effect: Better cleaning effect (2 to 4 times higher than conventional ) can improve productivity and save on costs. By using Hitec brush rolls, some customers can increase line speed, use half the conventional brushes or switch off the electrolytic panels in their cleaning section (with consequent energy saving costs).


Surfacing.... Step by Step on Metal Strip

Round Tube Abrasive Roller Brush